Poly-Hanger #2 supports one or more layers of poly in front of walls. It easily clips over the horizontal leg of acoustic ceiling wall molding. The prong makes hanging poly faster and ensures it will stay up during the length of the job.
And best of all, they are REUSABLE!
Securely hang poly sheeting directly to wall moldings of acoustic ceilings
Eliminates damage to wall surfaces and resulting clean-up costs
Simple to install, remove and reuse on the next job
Increases productivity and saves on labor
Eliminates using spray glue to support poly sheeting
Prevents poly sheeting from falling down
Install Hangers approximately 3' apart. Hang the poly sheeting on the prong keeping the top of the poly just below the wall molding. Complete the containment by taping between the poly and the molding and by taping over the prong (use our non-porous 2” Red Serrated-Edge Tape).
Note: If Poly-Hanger #2 is installed on light duty molding, the u-shaped top of the clip may have to be compressed with pliers to obtain a tight fit so the clip will not slip off the molding before the tape is installed.
Case lots only