Ensure that the surface is clean prior to applying EZ-ier Tape.
|2. || |When applying EZ-ier Tape, press down firmly to ensure adhesion to the surface.
|3. || |
At corners (i.e. wall-to-wall, wall-to-ceiling), cut the tape and start a new strip.
|4. ||To remove the release liner: |
Tearing EZ-ier Tape away from you (as pictured) will create a small tab in the release liner for easy removal.
When removing the release liner DO NOT PULL OUT, pull down.
- Remove the release liner in sections to prevent the poly sheeting from inadvertently sticking.
|5. || |
To avoid causing damage, remove the tape slowly.
|6. || |
Store EZ-ier Tape at least 45°F to room temperature. Storage areas that are too hot or too cold will degrade the adhesiveness of the tape. (If taping to a surface that is cold, allow a little longer setup time for full adhesion.)
|7. || |
|8. ||Remember, EZ-ier Tape is only as good as your surface! Do not apply to fresh paint or old, peeling paint.|