Poly-Hanger #3 supports poly from ceiling grid and other overhead objects. Poly is installed over the pin and is held in place by a removable retainer. Poly-Hanger #3 supports poly both horizontally and vertically for building full containments, connecting tunnels, dust curtains, and temporary protection barriers.
And best of all, they are REUSABLE!
Securely hang poly sheeting directly to ceiling grid
Eliminates damage to wall surfaces and resulting clean-up costs
Simple to install, remove and reuse on the next job
Increases productivity and saves on labor
Eliminates using spray glue to support poly sheeting
Prevents poly sheeting from falling down
Looks clean and professional
Retainer removes quickly by compressing sides (pinching).
Containments for abatement with .02" negative air pressure:
To support poly horizontally below grid ceilings, space the hangers at 4' to 6' apart.
To support vertical poly for walls, space the hangers at 3' to 4' apart.
Reduce spacing if negative air pressure exceeds .02 differential or if temperature exceeds 100°F.
Dust curtains and construction enclosures:
Note: Do not reuse these Poly-Hangers if the teeth are worn. Teeth wear is substantially increased by failing to compress (pinch) the retainer when installing and removing the retainer.
Case lots only