Poly-Hanger #3 supports poly from ceiling grid and other overhead objects. Poly is installed over the pin and is held in place by a removable retainer. Poly-Hanger #3 supports poly both horizontally and vertically for building full containments, connecting tunnels, dust curtains, and temporary protection barriers.
And best of all, they are REUSABLE!
Benefits:
-
Securely hang poly sheeting directly to ceiling grid
-
Eliminates damage to wall surfaces and resulting clean-up costs
-
Simple to install, remove and reuse on the next job
-
Increases productivity and saves on labor
-
Eliminates using spray glue to support poly sheeting
-
Prevents poly sheeting from falling down
-
Looks clean and professional
Applications:
Installation:
Retainer removes quickly by compressing sides (pinching).
Containments for abatement with .02" negative air pressure:
-
To support poly horizontally below grid ceilings, space the hangers at 4' to 6' apart.
-
To support vertical poly for walls, space the hangers at 3' to 4' apart.
-
Reduce spacing if negative air pressure exceeds .02 differential or if temperature exceeds 100°F.
Dust curtains and construction enclosures:
Note: Do not reuse these Poly-Hangers if the teeth are worn. Teeth wear is substantially increased by failing to compress (pinch) the retainer when installing and removing the retainer.
Case lots only
Shopping Cart